Yarn Twist Testing: TPI, TPM Formula and Twist Multiplier Explained

Edit

Yarn Twist Testing: TPI, TPM Formula and Twist Multiplier Explained

Textile laboratory technician measuring yarn twist using an electronic yarn twist tester. TPI calculation, TPM formula, twist multiplier, yarn twist tester, S twist and Z twist

Yarn twist measurement helps assess yarn construction and consistency.

Two yarns can have the same count but behave differently during knitting, weaving and garment manufacturing. One important reason is twist. Twist influences fibre cohesion, yarn structure, handling and several performance characteristics.

Yarn twist testing measures the number of turns inserted into a yarn over a specified length. The result is commonly expressed as TPI or TPM.

1. What Is Yarn Twist?

Yarn twist is the helical arrangement created when fibres or yarn components rotate around the yarn axis. In staple-spun yarn, twist helps hold fibres together and contributes to yarn integrity.

Twist is commonly classified into two directions:

  • S twist: The visible diagonal follows the central direction of the letter S.
  • Z twist: The visible diagonal follows the central direction of the letter Z.

2. What Are TPI and TPM?

TermMeaning
TPITurns per inch.
TPMTurns per metre.
TPCMTurns per centimetre.

3. Yarn Twist Testing Equipment

  • Electronic or mechanical yarn twist tester.
  • Specimen clamps.
  • Length measuring scale or gauge.
  • Suitable tensioning device and weights.
  • Yarn specimen identification sheet.

4. Single Yarn Twist Calculation

For the conventional untwist-retwist method, the single yarn twist is calculated as:

TPI = N ÷ (2 × L)

Where:

  • N = total counter revolutions during the specified untwist-retwist test.
  • L = original specimen length in inches.

For metric units:

TPCM = N ÷ (2 × L)

Here, L is the original specimen length in centimetres.

Worked example

Assume a single-yarn specimen has an original length of 25 cm and the tester records 500 revolutions.

TPCM = 500 ÷ (2 × 25)

TPCM = 10 turns/cm

To convert to TPM:

TPM = 10 × 100

TPM = 1,000 turns/metre

5. Ply Yarn Twist Calculation

For a direct-count ply-yarn twist measurement, the calculation is generally:

TPM = N ÷ L

Where N is the recorded number of turns and L is the specimen length in metres.

The single-yarn untwist-retwist calculation must not be confused with the ply-yarn direct-count method. Always follow the selected test method.

6. Conversion Between TPI, TPCM and TPM

  • 1 inch = 2.54 cm.
  • 1 metre = 100 cm.
  • TPM = TPI × 39.3701.
  • TPI = TPM ÷ 39.3701.
  • TPM = TPCM × 100.

Conversion example

If a yarn has 20 TPI:

TPM = 20 × 39.3701

TPM = 787.4 turns/metre approximately.

7. What Is Twist Multiplier?

Twist multiplier is a measure used to relate yarn twist to yarn fineness. It helps compare twist levels in yarns of different counts within the same count system and defined convention.

For cotton count (Ne), the commonly used English twist multiplier relationship is:

TM = TPI ÷ √Ne

Worked example

Assume cotton yarn count is 30 Ne and measured twist is 18 TPI.

TM = 18 ÷ √30

TM = 18 ÷ 5.477

TM ≈ 3.29

Twist multiplier conventions can differ by yarn system and application. Do not directly apply the cotton Ne formula to Tex, denier or other count systems without the correct conversion.

8. Factors Affecting Yarn Twist

  • Fibre length and fibre properties.
  • Yarn count and spinning system.
  • Spindle speed and delivery speed.
  • Product end-use and required yarn characteristics.
  • Twist direction and ply construction.

9. Common Yarn Twist Testing Problems

ProblemPossible reasonAction
Unstable readingsInconsistent specimen tension.Check the tensioning setup.
Different results between operatorsDifferent specimen handling or endpoint judgement.Standardise operator training.
Incorrect TPIWrong specimen length or formula.Verify the method and units.
Unexpected twist directionIncorrect yarn identification or production setting.Check the spinning process and yarn construction.

10. Factory Quality-Control Checklist

  • Identify yarn count and construction.
  • Confirm whether the specimen is single or ply yarn.
  • Use the correct twist-testing method.
  • Check gauge length and tension settings.
  • Record twist direction.
  • Test the required number of specimens.
  • Compare results with the approved yarn specification.

11. Frequently Asked Questions

What does TPI mean in yarn?

TPI means turns per inch and expresses the number of twists over one inch of yarn length.

How do I convert TPI into TPM?

Multiply TPI by 39.3701 to obtain turns per metre.

What is the difference between S twist and Z twist?

They describe opposite directions of yarn twist based on the visible diagonal of the yarn strands.

Does higher twist always mean stronger yarn?

No. Yarn strength depends on fibre characteristics, yarn count, spinning conditions and twist level. Excessive twist can also affect yarn properties.

Conclusion

Yarn twist testing is an important part of spinning quality control. Correct specimen preparation, method selection and unit conversion are essential for accurate TPI, TPM and twist multiplier results.

References

Post a Comment

0 Comments